I download the 1215 controls prog .
when I start the exe its asking for Frame network 4.5
When i try to install the net frame work its telling me you cannot install because you got a newer version and 4.5 is already on youre computer
Have you tried right click run as admin?
:-[ when i changed to p3d4 i had to upgrade the mjc pro from fsx to p3d4.
Just a couple of months before i changed from pilot to pro version in fsx.
And i made a stupid mistake with the upgrade to p3d4 ,instead the pro version ,I did the pilot version.
I never looked for it what version I used until a update came .
Lucky for me simmarket and mjc where willing to correct the mjc pilot version p3d4 to pro without paying twice.
wil
Whoopsie!
this tool works great rudder , elevator,ailerons and rudder.
I use 2 saitek throttle quadrants , is there a way to program them on the same way. For throttle , prop pitch and flaps
I now do it via fsuipc but is not very accurate
Quote from: Wil De Boer on Apr 11, 2019 18:07
this tool works great rudder , elevator,ailerons and rudder.
I use 2 saitek throttle quadrants , is there a way to program them on the same way. For throttle , prop pitch and flaps
I now do it via fsuipc but is not very accurate
Sadly not, the MJQ4 125hz controls only works on the 3 flight control surfaces, everything else has to be done through FSUIPC
thx for the reply.My saitek controllers are very old I`m waiting for the honeycomb controllers ,the will be on market in july..
the saitek flight yoke is oke but the throttle quadrants not.
I have deleted all the flight yoke axis in p3d4 and fsuipc but i need them for other AC. Have i reload the config everytime I used an other AC????
No you can leave them assigned in flight sim as the Majestic ignores them. I have a 2nd joystick for flying the airbus and it doesn't have any affect on the Q4
OK thx Chris,
glad to know,because I gonna fly with Mebar20`19 with a single prop.
Last night I flew with the Dash lztt-lows in a group flight.And with landing I noticed I have no brakes.
Deleting al the assigned axis i deleted the brakes also , not very clever .
the 125hz axis working great.
kind regards
wil