Intercity Airways Discussion Forums

Intercity Discussion Forums => Bombardier Dash 8 Q400 (DHC-8-402Q) => Topic started by: Wil De Boer on Jun 04, 2019 17:15

Title: mjc rudder
Post by: Wil De Boer on Jun 04, 2019 17:15
Since 2 flights the rudder stands constant to the left. So the ac constantly hangs over to the right
to compensate.
I have try`d everything there are no axes in fsuipc and p3d4 for aileron, elevator and rudder.
only the 125hz cfg

wilk
Title: Re: mjc rudder
Post by: Chris Hulme on Jun 05, 2019 14:07
Might sound silly but are you selecting the correct controller and axis in the 125hz tool? If you don't have the correct axis assigned they default to the left like your rudder?
Title: Re: mjc rudder
Post by: Wil De Boer on Jun 06, 2019 19:27
yes i have selected the correct axis.Flightrudder pedals axis RZ . In the mean time I have solved the problem.
The value`s in the ini file and mjc contol panel where different for  the center  value that I see using the cfg.tool.
Why I have no clue.
so i changed the center value in the ini file and mjc contol panel and I so lucky to fly straight.
only 1 thing I don`t understand .
Using the elevator axis with saitek pro flight yoke
when i pitch up I see the value changing very gradually when pitch down it go`s direct from straight to full down
in my case mjc control cfg straight 32678 ,up 65535 gradually , down direct 0.
with Y axis.
in pd34 no axis used.
all other AC axis with payware fsuipc and Aircraft sensitive , so there should no overlapping axis from other ac.
It came on my my mind maybe something wrong with the saitek yoke but this only happens with the MJC