Intercity Airways Discussion Forums

Intercity Discussion Forums => Bombardier Dash 8 Q400 (DHC-8-402Q) => Topic started by: Wil De Boer on Feb 20, 2019 19:44

Title: mjc dash pro on W10 p3d4
Post by: Wil De Boer on Feb 20, 2019 19:44
I download the 1215 controls prog .
when I start the exe its asking for Frame network 4.5
When i try to install the net frame work its telling me you cannot install because you got a newer version and 4.5 is already on youre computer
Title: Re: mjc dash pro on W10 p3d4
Post by: Chris Hulme on Feb 22, 2019 09:35
Have you tried right click run as admin?
Title: Re: mjc dash pro on W10 p3d4
Post by: Wil De Boer on Mar 25, 2019 11:57
 :-[ when i changed to p3d4 i had to upgrade the mjc pro from fsx to p3d4.
Just a couple of months before i changed from pilot to pro version in fsx.
And i made a stupid mistake with the upgrade to p3d4 ,instead the pro version ,I did the pilot version.
I never looked for it what version I used until a update came . 
Lucky for me simmarket and mjc where willing to correct the mjc pilot version p3d4 to pro without paying twice.

wil
Title: Re: mjc dash pro on W10 p3d4
Post by: Chris Hulme on Mar 26, 2019 14:10
Whoopsie!
Title: Re: mjc dash pro on W10 p3d4
Post by: Wil De Boer on Apr 11, 2019 18:07
this tool works great rudder , elevator,ailerons and rudder.
I use 2 saitek throttle quadrants , is there a way to program them on the same way. For throttle , prop pitch and flaps
I now do it via fsuipc but is not very accurate 
Title: Re: mjc dash pro on W10 p3d4
Post by: Chris Hulme on Apr 12, 2019 14:16
Quote from: Wil De Boer on Apr 11, 2019 18:07
this tool works great rudder , elevator,ailerons and rudder.
I use 2 saitek throttle quadrants , is there a way to program them on the same way. For throttle , prop pitch and flaps
I now do it via fsuipc but is not very accurate

Sadly not, the MJQ4 125hz controls only works on the 3 flight control surfaces, everything else has to be done through FSUIPC
Title: Re: mjc dash pro on W10 p3d4
Post by: Wil De Boer on Apr 12, 2019 18:40
thx for the reply.My saitek controllers are very old I`m waiting for the honeycomb controllers ,the will be on market in july..
the saitek flight yoke is oke but the throttle quadrants  not.
I  have deleted all the flight yoke  axis in p3d4  and fsuipc but i need them for other AC. Have i reload the config everytime I used an other AC????
Title: Re: mjc dash pro on W10 p3d4
Post by: Chris Hulme on Apr 13, 2019 09:31
No you can leave them assigned in flight sim as the Majestic ignores them. I have a 2nd joystick for flying the airbus and it doesn't have any affect on the Q4
Title: Re: mjc dash pro on W10 p3d4
Post by: Wil De Boer on Apr 14, 2019 19:08
OK thx Chris,
glad to know,because I gonna fly with Mebar20`19 with a single prop.
Last night I flew with the Dash lztt-lows in a group flight.And with landing I noticed I have no brakes.
Deleting al the assigned axis i deleted the brakes also , not very clever .


the 125hz axis working great.
kind regards
wil